51工具盒子注意：这是centos7.4安装配置酸酸(ss)客户端教程
请注意，这是linux"客户端"连接酸酸的教程，不是"服务器"教程，小白不要再给我留言了。
服务器教程在这里： https://blog.whsir.com/post-4884.html
1、配置epel源，安装python-pip
wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo yum install python-pip pip install --upgrade pip
|-------|--------------------------------------------------------------------------------------------------------------------------------| | 1 2 3 | wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo yum install python-pip pip install --upgrade pip |
2、安装shadowsocks
pip install shadowsocks
|---|-------------------------| | 1 | pip install shadowsocks |
3、创建配置文件
mkdir /etc/shadowsocks
|---|------------------------| | 1 | mkdir /etc/shadowsocks |
vi /etc/shadowsocks/shadowsocks.json
|---|--------------------------------------| | 1 | vi /etc/shadowsocks/shadowsocks.json |
添加以下内容
{ "server":"69.17.66.77", "server_port":6666, "local_address": "127.0.0.1", "local_port":1080, "password":"password", "timeout":300, "method":"aes-256-cfb", "fast_open": false, "workers": 1 }
|-------------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | 1 2 3 4 5 6 7 8 9 10 11 | { "server":"69.17.66.77", "server_port":6666, "local_address": "127.0.0.1", "local_port":1080, "password":"password", "timeout":300, "method":"aes-256-cfb", "fast_open": false, "workers": 1 } |
备注：
server填写你代理服务器的IP
server_port代理服务器设置的端口
password代理服务器密码
这几个参数很好理解，前提是你了解过并且有ss代理
4、配置自启动
vi /etc/systemd/system/shadowsocks.service
|---|--------------------------------------------| | 1 | vi /etc/systemd/system/shadowsocks.service |
添加以下内容
[Unit] Description=Shadowsocks [Service] TimeoutStartSec=0 ExecStart=/usr/bin/sslocal -c /etc/shadowsocks/shadowsocks.json [Install] WantedBy=multi-user.target
|---------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------| | 1 2 3 4 5 6 7 | [Unit] Description=Shadowsocks [Service] TimeoutStartSec=0 ExecStart=/usr/bin/sslocal -c /etc/shadowsocks/shadowsocks.json [Install] WantedBy=multi-user.target |
5、启动shadowsocks客户端
systemctl enable shadowsocks.service systemctl start shadowsocks.service systemctl status shadowsocks
|-------|-------------------------------------------------------------------------------------------------------| | 1 2 3 | systemctl enable shadowsocks.service systemctl start shadowsocks.service systemctl status shadowsocks |
6、验证
验证shadowsocks客户端是否正常运行，正常会返回你的代理IP
curl --socks5 127.0.0.1:1080 http://httpbin.org/ip
|---|----------------------------------------------------| | 1 | curl --socks5 127.0.0.1:1080 http://httpbin.org/ip |
7、安装配置privoxy
Shadowsocks是一个socket5服务，我们需要使用privoxy把流量转到http/https上
yum install privoxy
|---|---------------------| | 1 | yum install privoxy |
8、启动privoxy
systemctl enable privoxy systemctl start privoxy systemctl status privoxy
|-------|---------------------------------------------------------------------------| | 1 2 3 | systemctl enable privoxy systemctl start privoxy systemctl status privoxy |
9、配置privoxy
vi /etc/privoxy/config
|---|------------------------| | 1 | vi /etc/privoxy/config |
确保以下两行内容没有被注释掉，forward-socks5t这里端口改成1080，listen-address默认端口不用改
listen-address 127.0.0.1:8118 forward-socks5t / 127.0.0.1:1080 .
|-----|------------------------------------------------------------------| | 1 2 | listen-address 127.0.0.1:8118 forward-socks5t / 127.0.0.1:1080 . |
10、修改/etc/profile
vi /etc/profile
|---|-----------------| | 1 | vi /etc/profile |
在最下面添加以下内容
export http_proxy=http://127.0.0.1:8118 export https_proxy=http://127.0.0.1:8118
|-----|----------------------------------------------------------------------------------| | 1 2 | export http_proxy=http://127.0.0.1:8118 export https_proxy=http://127.0.0.1:8118 |
使其生效
source /etc/profile
|---|---------------------| | 1 | source /etc/profile |
11、验证
curl www.google.com
|---|---------------------| | 1 | curl www.google.com |
如果可以正常返回内容，即表示配置成功
附：ss服务端一键脚本https://blog.whsir.com/post-2046.html
